How to Apply Deoxit

Deoxit is a brand of contact cleaner and enhancer that can be used to clean and improve the conductivity of electrical contacts, switches, and other electronic components. Here are the steps to apply Deoxit:

1. Turn off the power: Before applying Deoxit, make sure to turn off the power to the device you'll be working on and unplug it from the outlet.

2. Identify the contacts: Identify the contacts or switches that need cleaning. If you're not sure, consult the device's user manual.

3. Apply Deoxit: Apply a small amount of Deoxit to the contacts. Use a cotton swab or a soft-bristled brush to spread the Deoxit evenly over the contacts. Be careful not to use too much Deoxit, as this can cause the solution to seep into other parts of the device.

4. Wait: Allow the Deoxit to work on the contacts for a few minutes. The time required may vary depending on the severity of the corrosion or oxidation.

5. Wipe off excess: After waiting, use a dry cotton swab or cloth to wipe off any excess Deoxit.

6. Turn on the power: Once you've wiped off the excess Deoxit, you can turn on the power and test the device. If the problem persists, you may need to apply Deoxit again or consult a professional.

7. Store the Deoxit: When you're finished, be sure to store the Deoxit in a cool, dry place, away from direct sunlight and heat sources.

Note: Deoxit comes in different types, such as spray and liquid form, and some types are designed for specific applications. Be sure to read the instructions carefully before using Deoxit and follow the manufacturer's recommendations.