Editing Openai/6940b2df-db80-8003-b707-4cc5cbedf6d9 (section)

=== User: Read over this manual. ===
Read over this manual. I need to know how to change out the power distribution box that sits on top of the battery in my 2007 BMW 328i e90 n52 engine. I also need to know how to use my pb6000 to test the battery and starter and alternator for my car, since my car has a freshly charged battery that when connected my car and attempted to start it. The car cranks really fast, but won’t catch and start. The amps being put out by the battery during cranking is 11.4. I think it has to do with the power distribution box, which mine is melted and warped and flimsy or the front of the car positive jump post and chassis ground or the alternator. Also, I bought the Autool E365 150 A programmable battery charger and maintainer. Then I have ISTA+ and ISTA-P with a K+ D-Can cable. I also have INPA, so if you can guide me through how to use these programs and devices for what I need done to my BMW. But I am need a step by step guide on how to change the power distribution box. So I can get the correct cranking voltage out of my car.