Editing Openai/696d4fbf-cd9c-8002-851c-19bcf98e97fa (section)

=== Option 2: “One-piece kneeling sled deck” (your own rigid kneeling chassis) ===

This is the cleanest mechanical solution if you’re handy.

===== Concept =====

Instead of modifying bindings, you create a single rigid kneeling deck that spans both mounting zones (like a bridge). It mounts using standard binding inserts, and your knees land on a single strong surface.

===== Parts =====
* 1/4" aluminum plate or layered birch plywood sealed with epoxy
* 2–4 insert mount points (binding insert pattern)
* Thick closed-cell foam pads for knees
* 2 shin cups / shin clamps (can be hockey shin guards)
* Rear foot cup (foam + strap)

===== Build details =====
* The kneeling deck should extend from just behind the front inserts to just behind the rear inserts.
* Add raised ridges on both sides of each knee to prevent lateral slip.
* Add a center spine under deck (aluminum angle or wood rib) to prevent flex.
* Use two shin clamps at each shin (one near mid-shin, one near ankle area)
* Feet tuck back into a padded boot cup.

===== Pros / Cons =====
* ✅ Best load distribution and knee protection
* ✅ Most stable
* ✅ Can mount stronger ejection releases
* ❌ Most fabrication work